Tue, 6 Feb 2007, Manuel Bouyer wrote:

The following reply was made to PR kern/35545; it has been noted by GNATS.

From: Manuel Bouyer <bouyer (AT) antioche (DOT) eu.org>
To: gnats-bugs (AT) NetBSD (DOT) org
Cc: kern-bug-people (AT) NetBSD (DOT) org, gnats-admin (AT) NetBSD (DOT) org,
netbsd-bugs (AT) NetBSD (DOT) org
Subject: Re: kern/35545: NetBSD-current will not boot with AHCI and L SATA CD
Date: Tue, 6 Feb 2007 22:53:59 +0100

Sat, Feb 03, 2007 at 05:15:01AM +0000, htodd (AT) twofifty (DOT) com wrote:
>Number: 35545
>Category: kern
>Synopsis: NetBSD-current will not boot with AHCI and L SATA CD
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Feb 03 05:15:00 +0000 2007
>: H. Todd Fujinaka
>Release: NetBSD 4.99.9
>:
None
>Environment:
>
Hi,
could you give more details about what happens when there's the cd drive
in ahci mode ?

It just hangs and won't recognize any input from either a USB or PS/2
keyboard. I've been moving stuff around on my hard drive, so once I get
my mbr problems fixed I'll use a serial console to see if I can get a
backtrace.

I can't get the serial console to respond to any keystrokes, either.
Perhaps my null modem cable isn't a null modem cable.

The output is attached to where the system hangs:


>NetBSD/i386 BIS Boot, Revision 3.3
>(htodd (AT) kerry (DOT) i8u.org, Sat Jan 27 14:36:51 PST 2007)
>Memory: 635/2095744 k
Press return to boot now, any other key for boot menu
booting hd1a:netbsd - starting in 0
3686564+82468+206100 [222528+219324]=0x4388b0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 4.99.9 (ERIKA) #7: Wed Feb 7 23:52:21 PST 2007
htodd@
total memory = 2047 MB
avail memory = 2007 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIS32 rev. 0 found at 0xf0010
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (P5B )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 2402.01 MHz, id 0x6f6
cpu0: "Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz"
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1340 mV) 2400 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Core 2 (Merom) (686-class), 2401.92 MHz, id 0x6f6
cpu1: "Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz"
cpu1: using thermal monitor 1
cpu1: Enhanced SpeedStep (1340 mV) 2400 MHz
cpu1: unknown Enhanced SpeedStep CPU.
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2 (I/ APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x29a0 (rev. 0x02)
ppb0 at pci0 dev 1 function 0: Intel product 0x29a1 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: NVIDIA product 0x0295 (rev. 0xa1)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18 (irq 15)
ehci0: BIS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 3)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
pci2 at ppb1 bus 4
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: memory space enabled, rd/line, wr/inv ok
unknown vendor 0x1969 product 0x1048 (ethernet network, revision 0xb0) at pci3 d
ev 0 function 0 not configured
ppb3 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x02)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci4 dev 0 function 0: unknown vendor 0x197b product 0x2363
ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
ahcisata0: interrupting at ioapic0 pin 16 (irq 11)
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
pciide0 at pci4 dev 0 function 1
pciide0: unknown vendor 0x197b product 0x2363 (rev. 0x02)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 17 (irq 0) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus3 at pciide0 channel 1
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 23 (irq 14)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19 (irq 10)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci4: interrupting at ioapic0 pin 18 (irq 15)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 14)
ehci1: BIS refuses to give up ownership, using force
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xf2)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
wm0 at pci5 dev 2 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 0
wm0: interrupting at ioapic0 pin 23 (irq 14)
wm0: Ethernet address 00:e0:0c:01:f4:68
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX
, auto
fwohci0 at pci5 dev 3 function 0: VIA Technologies VT6306 IEEE 1394 Host Control
ler (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 21 (irq 11)
fwohci0: HCI version 1.0 (RM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:e8:39:db
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip at ieee1394if0 not configured
fwohci0: Initiate bus reset
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801H LPC Interface Bridge (rev. 0x02)
ahcisata1 at pci0 dev 31 function 2: Intel 82801H AHCI SATA Controller with 6 po
rts
ahcisata1: AHCI revision 1.1, 6 ports, 32 command slots, features 0xff22e0c0
ahcisata1: interrupting at ioapic0 pin 19 (irq 10)
atabus4 at ahcisata1 channel 0
atabus5 at ahcisata1 channel 1
atabus6 at ahcisata1 channel 2
atabus7 at ahcisata1 channel 3
atabus8 at ahcisata1 channel 4
atabus9 at ahcisata1 channel 5
Intel 82801H SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 f
unction 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x11d4/0x1988 (rev. 4.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=8, encodings=1<PCM>
azalia0: playback: PCM formats=e07ff<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.
2kHz,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz, 8kHz>
azalia0: recording: max channels=2, DIGITAL, encodings=5<AC3,PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88
2kHz,48kHz,44.1kHz>
audio0 at azalia0: full duplex, independent

fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
ahcisata1 port 0: device present, speed: 1.5Gb/s
ahcisata1 port 1: device present, speed: 3.0Gb/s
ahcisata1 port 5: device present, speed: 1.5Gb/s
wd0 at atabus4 drive 0: <ST3250620AS>
wd0: quirks 2<FRCE_LBA48>
wd0: drive supports 16-sector PI transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PI mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata1:0:0): using PI mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus5 drive 0: <WDC WD2500KS-00MJB0>
wd1: drive supports 16-sector PI transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: drive supports PI mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata1:1:0): using PI mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uvm_fault(0xc04c7720, 0, 1) -0xe
kernel: supervisor trap page fault, code=0
Stopped in pid 21.1 (atabus9) at 0: invalid address
db{0}>