Hi,
When I did a fresh install of BSD 3.9 on my laptop, I am unable to boot
the system.
I also cannot enter config, because it stops right after it tries to load my
cpu:
The problem occurs everytime I try to boot the system.
When I try the /bsd.rd kernel, nothing happends. I suspect it has something
to do with the "AMD Powernow" as I saw something changed in that area from
3.8 to 3.9.
When trying to boot /bsd:
BSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
deraadt@
cpu0: mobile AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMV,PAT,PSE36,MMX,FXSR,
SSE
cpu0: AMD Powernow: TS FID VID
kernel: page fault trap, code=0
Stopped atk7pnow_states+0x86:cmpl0(%eax),%ecx
TRACE :
ddbk7pnow_states(d0f68e00,6a0,16,b) at k7pnow_states+0x86
k7_powernow_init(0,0,0,7,d05a6644) at k7_powernow_init+0xeb
amd_family6_setup(d06903a0,d0548c55,d053978c,20000 00) at
amd_family6_setup+0xbd
identifycpu(d06903a0,d0539384,10,d0777000,d05a6644 ) at identifycpu+0x36f
cpu_startup(d0518c55,d05179a0,d070bfa0,d020e61e,1f ff0000) at
cpu_startup+0x94
main(0,0,0,0,0) at main+0x5c
PS :
ddbPID PPID PGRP UID S FLAGS WAIT CMMAND
ddbrebooting
DMESG (when started with bsd.rd kernel):
BSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006
deraadt@
cpu0: mobile AMD Athlon(tm) XP 2500+ ("AuthenticAMD" 686-class, 512KB L2
cache) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMV,PAT,PSE36,MMX,FXSR,
SSE
real mem = 536387584 (523816K)
avail mem = 483577856 (472244K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIS, date 07/09/03, BIS32 rev. 0 @ 0xfda60
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7f10/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8235 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: RM list: 0xc0000/0xf000 0xcf000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M9 Lf" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 11 function 0 " Micro Z69[17]2 CardBus" rev 0x00: irq 10
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 10
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHM2150AT>
wd0: 16-sector PI, LBA, 14403MB, 29498112 sectors
wd0(pciide0:0:0): using PI mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CDRW/DVD SBW-241, VU02SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PI mode 4, Ultra-DMA mode 2
"VIA VT8233 AC97" rev 0x50 at pci0 dev 17 function 5 not configured
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
00:03:0d:03:5b:96
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: UI
0x004063, model 0x0032
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask fffd netmask fffd ttymask ffff
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
Thank you for your time!