



Let me introduce myself;My name is Jodi Hans. I've earned $30,000+ in a month, BUT IT'S ALL CME CRASHING DWN and here's whyYou may have the best program, the best opportunity in the world. The best website.It doesn't matter. YU WILL FAIL IF YU DNT READ THIS.For months I'...
decent quality videolow quality videolooks better than Nvidia's "Adrianne" tech demo for the G80 ~ GeForce8800 GTXR600 / Radeon X2900XTX is a friggin' 512-bit MNSTER that willprovide bandwidth of over 100 GB/s even with lower-end GDDR3 memory.According to Wikipedia, R600's bandwid...
Hallo,i can't undersand if i can connect on SCSI controller 1 a DDS4 ArchivePython.X226 has two scsi channel: the first one has nothing connected and thesecond is used by raid controller.I succesfully connected my tape device to channel 1 and seems to works finebut Ibm says that i have to p...
AMD promises new Turions will bring 5-hour battery life - TechSpot News...
Hi,I'm looking to upgrade laptops harddrive from the 5400rpm to 7200rpm. Anyone done this before? Any noticeable gains in performance on a Celeron 1.6M? I already got a quote from (URL address blocked: See forum rules) that they will do it for $130.Thanks,George...
Hello Everyone,I recently bought a PC and an 19" AC LCS monitor (1440x900), just tobe deeply disappointed to find out that the on-board VIA P4M890chipset does not support this resolution :(Now I am after a cheap VGA card (PCI-X), and the reasonable optionsseem to be built around nVidia Geforce 7...
I don't know if this is the right group for this but can anyone tellme what is the BIS device number for the USB, floppy and SCSI? I'mgoing to use for the BIS calls particularly the INT 13h extensions.The first hard disk BIS device number is 80h, and the next one is81h, right? Thanks i...
Just bought a maxtor 6H400F0 400GB SATA drive from Frys for $110.The spec says 8.5ms access but HD tach says access time is 19.1 ms.Admittedly, the drive is filled up 50% already before I remember to run thebenchmark. Could this affect the test result?An older IDE drive is tested to have 15 ms....
RAID Setup help needed.Going to take the plunge and Raid two 400 Gig Samsugn SATA 2 drives,or at least try to.I want to use the system mainly for destop USE, but also play somegames and do some Video Editing with BIG HD 1080i .ts video files andthe like.I have never raided anythign before , So p...
Hi. I'm really interested in this mobile drive, which is actually aRAID 0 configuration, from G-Technology:I really like this idea, but I'm a little worried about running it onFireWire bus power. I'm not worried about battery drainage -- I'mworried about the current draw fryi...
I have an aging system that really suits me well and I would like,if possible, to extend its useful life for as much as it makessense (financial and computing):Asus A7V400-MX (Socket A) - Sempron 2200+single stick 512 Mb 333 GHz DDR RAM2x120 Gb ATA133 disksI am considering an upgrade for about $...
does anyone knows how to reset the username and password of HD363N NAS ?Tks...
