Unix

NAVIGATION
CATEGORIES
REFERRENCE
LINKS
  • ce0: Cassini gigabit ether

    0 answers - 2543 bytes - related search similar search Add To My Delicious Add To My Stumble Upon Add To My Google Mark Add To My Facebook Add To My Digg Add To My Reddit

    My Sincere thanks to all who responded. Please note the summary of feed backs and discovery;
    1)ce type device refers to Sun Gigaswift Network adapter. It comes in copper and FC flavors.
    2)the ce.conf has to be created by the administrator to force the settings at the boot time. It is created in "/"
    3) "nnd -get" wont work, use "kstat -m ce -i 0" to get config info.
    4)The user and install guide is avaiable on
    ""
    Thanks
    From: Graeme Burke <gburke (AT) astrology (DOT) com>
    Date: 2005/07/21 Thu PM 01:19:25 EDT
    To: aalinaser (AT) cox (DOT) net
    Subject: Re: ce0: Cassini gigabit ether
    aalinaser (AT) cox (DOT) net wrote:
    Hello All,
    I have a SUN V480 with two SunGigaSwift Ethernet Copper ports on it. I cannot find the ce.conf file anywhere on the system. Even running the "ndd -get /dev/ce link_status" and etc gives me errors, in otherwords does not recognize ce device. How can I trouble shoot this.
    How can I find out exactly what driver version is running for this device and etc.
    This will tell you the version of the package.
    # pkginfo -il SUNWcedx
    or
    # pkginfo -il SUNWced
    x is for 64 bit. If it's s10, there is just a SUNWced, which is 64 bit.
    Is the driver loaded into memory? Check:
    # modinfo | grep ' ce '
    Note, this will tell you the version of the driver itself. If it's not
    loaded, try to load it indirectly with ifconfig.
    Try to plumb the interface:
    # ifconfig ce0 plumb
    You could also modload.
    The ce.conf is not created automagically. You need to create it if you so desire. Look
    here:
    /
    Also, man ce.
    #grep ce /etc/driver_aliases
    ce "pci108e,abba"
    ce "pci100b,35"
    usb_mid "usb,device"
    #grep ce /etc/path_to_inst
    "/pci@9,700000/usb@1,3/device@2" 0 "usb_mid"
    "/pci@9,700000/usb@1,3/device@2/keyboard@0" 0 "hid"
    "/pci@9,700000/usb@1,3/device@2/mouse@1" 1 "hid"
    "/pci@9,700000/network@2" 0 "ce"
    "/pci@9,600000/network@1" 1 "ce"
    This tell us that the driver was installed, at least one point in time, it
    most likely needs to be loaded. Doing an ndd, might not trigger the load
    of the driver.
    This message may be construed as an advertisement, solicitation or
    commercial email. Please reply to the above referenced email address if
    you do not wish to receive future emails from the sender.
    sunmanagers mailing list
    sunmanagers (AT) sunmanagers (DOT) org

Re: ce0: Cassini gigabit ether


max 4000 letters.
Your nickname that display:
In order to stop the spam: 4 + 3 =
QUESTION ON "Unix"

EMSDN.COM